Prestige 128MH PSTN Router/Hub
Table
Table | Edit IPX Static Route Menu Fields | |
|
| |
Field | Description | |
|
| |
Server Name | In this field, enter the name of the server. This must be the exact name configured in | |
| the NetWare server. | |
Network # | This field contains the internal network number of the remote server that you wish to | |
access. [00000000] or [FFFFFFFF] are reserved. | ||
| ||
|
| |
Node # | This field contains the address of the node on which the server resides. If you are using | |
| a Novell IPX implementation, this value is [000000000001]. | |
Socket # | This field contains the socket number on which the server will receive service requests. | |
| The default for this field is hex [0451]. | |
Type # | This field identifies the type of service the server provides. The default for this field is | |
| hex [0004]. | |
Gateway Node | In this field, enter the number of the remote node that is the gateway for this static route. | |
Hop Count and | These two fields have the same meaning as those in the Ethernet setup. | |
Tick Count |
|
Once you have completed filling in the menu, press [Enter] at the message [Press ENTER to Confirm…] to save your configuration, or press [Esc] to cancel to cancel.
Remote Node IPX Configuration |