Class 3 Service, Configured Zone Sets, Device Security | Q-Logic 64

D

SANbox2-64 Fibre Channel Switch Installation Guide

Class 3 Service

A service which multiplexes frames at frame boundaries to or from one or more N_Ports without acknowledgment.

Configured Zone Sets

The zone sets stored on a switch excluding the active zone set.

Default Visibility

Zoning parameter that determines the level of communication among ports/devices when there is no active zone set.

Device Security

A component of fabric security that provides for the authorization and authentication of devices that attach to a switch through the use of groups and security sets.

Domain ID

User defined number that identifies the switch in the fabric.

Event Log

Log of messages describing events that occur in the fabric.

Expansion Port

E_Port that connects to another FC-SW-2 compliant switch.

Fabric Database

The set of fabrics that have been opened during a SANbox Manager session.

Fabric Device Management Interface

An interface by which device host bus adapters can be managed through the fabric.

Fabric Management Switch

The switch through which the fabric is managed.

Fabric Name

User defined name associated with the file that contains user list data for the fabric.

Fabric Port

An F_Port or FL_Port.

Fabric Security

The functions that provide security for fabric users and devices including device security, user account security, and fabric services.

Fabric Services

A component of fabric security that provides for the control of inband management and SNMP on a switch.

Fabric View File

A file containing a set of fabrics that were opened and saved during a previous SANbox Manager session.

Fan Fail LED

An LED that indicates that a cooling fan in the switch is operating below standard.

FDMI

See Fabric Device Management Interface.

Flash Memory

Memory on the switch that contains the chassis control firmware.

Force PROM Mode

See Maintenance Mode.

Glossary-2

59043-03 A

Image 232

Q-Logic 64 Class 3 Service, Configured Zone Sets, Default Visibility, Device Security, Domain ID, Event Log, Fabric Name

Contents

SANbox2-64 Fibre Channel Switch Installation Guide SANbox2-64 Fibre Channel Switch Installation Guide Document Revision History Table of Contents Section Installation Section PlanningDevices Multiple Chassis Fabrics Site Requirements Fabric Management Workstation Section Diagnostics/Troubleshooting Section Removal/Replacement Appendix a Specifications Appendix B Command Line Interface Command Syntax Zone Command Zoneset Command 101 Zoning Command 104 Glossary Index Tables Serial Port Pin IdentificationPage Introduction Intended Audience Related Materials Safety Notices Sicherheitshinweise Communications Statements Federal Communications Commission FCC Class a Statement CE Statement Vcci Class a Statement Bsmi Class a Statement Laser Safety Information Electrostatic Discharge Sensitivity Esds Precautions Pièces Accessibles Accessible PartsZugängliche Teile General Public License Preamble 12.2 Introduction General Public License Introduction General Public License Introduction General Public License How to Apply These Terms to Your New Programs No Warranty Copyright C yyyy name of author Technical Support AvailabilityTraining Contact Information General Description SANbox2-64 64-Port Fibre Channel Switch Chassis Hardware Slot and Fibre Channel Port Numbering Maintenance Button Chassis Controls and LEDs Resetting a Switch Placing the Switch in Maintenance Mode Chassis LEDs Over Temperature LED AmberFan Fail LED Amber Heartbeat LED Amber Input Power LED GreenFibre Channel Ports Port Status LED Small Form-Factor Pluggable SFP Transceivers Port Modes Fabric PortsExpansion Port Ethernet Port Serial Port Ethernet Port Serial Port Pin Identification Pin Number Description Power Supply Modules Power Supply Components Fans 10. Fans Switch Management Planning Devices Single Switch Fabric with Initiators and Targets Dual Switch Fabric with Initiators and Targets Multiple Chassis Fabrics Domain ID, Principal Priority, and Domain ID Lock Common Topologies Performance Distance Bandwidth LatencyPort-to-Port Transmission Combinations Port-to-Port Latency Device Access Access Control List Hard Zones Soft Zones Virtual Private Fabric Hard Zones Fabric Security User Account Security Security Example Switches and HBAs Device Security Node WWN 100000c0dd07c34d Secret fedcba9876543210fedcba9876543210fedcba Node WWN 100000c0dd 07e34e Security Example Host Authentication Create a security set SecuritySet2 on Switch2 MS Group Group1 Fabric Services Fabric Management Planning Fabric Management 59043-03 a Switch Power Requirements Site RequirementsFabric Management Workstation Management Workstation Requirements Installing a Switch Environmental Conditions Mount the Switch Avertissement Locked prior to applying power to the switch „ If the switch is mounted in a closed or multi-unit rackAssembly, make sure that the operating temperature inside Rack for service access and ventilation SANbox2-64 Rail Kit Install SFP Transceivers Connect the Switch to AC Power Avertissement Appendix a Specifications Connect the Management Workstation to the Switch Ethernet and Serial Cable Connections Ethernet Connection Serial Connection Install SANbox Manager Enter the following command at the Solaris prompt SANsurfer Management Suite Disk Windows Installation SANsurfer Management Suite Disk Linux Installation SANsurfer Management Suite Disk Solaris Installation Enter the following command SANbox2 Installation Disk Windows Installation SANbox2 Installation Disk Solaris Installation SANbox2 Installation Disk Linux InstallationConfigure the Switch Configure the Ports Cable Devices to the Switch Install Firmware Using SANbox Manager to Install Firmware To start an admin session, enter the following Using the CLI to Install FirmwareEnter the following command to install the new firmware Using FTP and the CLI to Install Firmware Close the FTP session Powering Down a Switch Heartbeat LED Blink Patterns Post DiagnosticsNormal all pass Maintenance Mode Pattern Fatal Error Blink PatternConfiguration File System Error Blink Pattern To recreate the configuration file, do the following Ftp Ftp switchname Restore the configuration file Enter the following account name and password userimagesReset the switch and close the Telnet session Logging Error Port Status LED Indications EPort Isolation Excessive Port Errors Diagnostics/Troubleshooting Post Diagnostics Chassis Diagnostics Chassis and Power Supply LEDs Input Power LED Is Extinguished Over Temperature LED is IlluminatedFan Fail LED is Illuminated Output Power LED Is Extinguished Power Supply Fault LED is Illuminated Recovering a Switch Maintenance Exit Maintenance Image Unpack Maintenance Reset Network Config Maintenance Reset Password FileMaintenance Copy Log Files Maintenance Remove Switch Config Maintenance Show Firmware Versions Maintenance Set Active Image Diagnostics/Troubleshooting Recovering a Switch 59043-03 a Marginal Operating Configurations SFP Transceivers CPU Module Removing the CPU Module Removal/Replacement CPU Module Installing the CPU Module Removing the CPU Module Ftp put imagefile Removal/Replacement CPU Module Blades Choose the Replace task Choose the slot number 6 for example Disconnect all cables from the selected I/O blade To install a new I/O blade, enter y Removing an I/O Blade Removal/Replacement I/O Blades Cross-Connect Blades CC Blade Slots Removing a CC Blade Switch Cover Removal Installing a CC Blade Installing a CC Blade Avertissement Removing a Power Supply Module Removing a Power Supply Module Installing a Power Supply Module Removing a Fan Removing a Fan Installing a Fan Installing a Fan Fabric Specifications Maintainability Dimensions Electrical Environmental Regulatory Certifications Shortwave Laser SFP 1G/2G multi-mode Longwave Laser SFP 1G/2G single-mode Page Command Line Interface Logging On to a Switch Command Syntax Table B-1. Command-Line Completion Commands Table B-2. Commands Listed by Authority Level Admin Command AuthoritySyntax Keywords Alias Command Syntax alias Remove alias memberlist Members aliasRename aliasold aliasnew Config Command Syntax configKeywords activate config Edit config Restore Archive function are not compatible with the Config RestoreCommand Save config # ftp symbolicname or ipaddress Syntax date Date CommandKeywords MMDDhhmmCCYY Fallback Command Fallback Group Command Syntax groupKeywords add group Table B-3. Group Member Attributes Copy groupsource groupdestination Create group typeEdit group member Table B-4. Group Member Attributes Following is an example of the Group Edit command Following is an example of the Group List commandMembers group Remove group members Following is an example of the Group Members command Hardreset Hardreset CommandPending firmware and disrupts traffic Help Command Keywords commandSyntax help command keyword Authority None Following is an example of the Help Set Beacon command History Command Authority None Syntax history Hotreset Command HotresetFabric is in the diagnostic operational state This command clears the event log and all counters Hotswap Command Hotswap To replace? 1,2,3,4,6,7,8,9 1 Image Command CleanupImage Fetch accountname ipaddress filesource filedestination Lip Command Passwd Command Changes a user account’s passwordPasswd accountname Accountname Ping Command Authority None Syntax PingIpaddress Keywords ipaddress Ps Command Following is an example of the Ps commandSyntax Examples Displays current system process information Closes the Telnet session Quit CommandSyntax quit, exit, or logout Reset Command Config configname Switch Table B-5. Switch Configuration DefaultsSystem Zoning Table B-6. Port Configuration Defaults Mfstov Table B-7. Alarm Threshold Configuration Defaults Table B-8. Zoning Configuration Defaults Table B-9. Snmp Configuration Defaults Table B-10. System Configuration Defaults Table B-11. Security Configuration Defaults Security Command Keywords activeClear Edit Following is an example of the Security History command HistoryLimits Save Following is an example of the Security Limits command Following is an example of the Security List command Securityset Command Delete securityset Groups securitysetRemove securityset group Rename securitysetold securitysetnew Set Command Syntax set Setup option Switch stateLog option Pagebreak state Set Config Command Table B-12. Set Config Port ParametersKeywords blade slotnumber Port portnumber Send Arbff True instead of IDLEs Table B-12. Set Config Port Parameters Table B-13. Security Configuration Parameters Table B-14. Set Config Switch Parameters Threshold Table B-15. Set Config Threshold Parameters Table B-16. Set Config Zoning Parameters Memory. Refer to FC-SW-2 Compliant Following is an example of the Set Config Port command Arbff Following is and example of the Set Config Security command Following is an example of the Set Config Switch command Following is an example of the Set Config Threshold command Following is an example of the Set Config Zoning command This Set Log Command Set logArchive Component list Level level Port portlist Start StopStops logging of events Level keyword to Info at the same time Set Port Command Set Setup Command Snmp configuration and one system configurationSet setup Table B-17. Snmp Configuration Settings Table B-18. System Configuration Settings SANbox2 admin # set setup snmp Trap1Severity See Following is an example of the Set Setup System command SANbox2 admin # set setup system Show Command AlarmKeywords about Blade Log option Fdmi nodewwnNs option Pagebreak PanelPerf option Table B-19. Show Port Parameters LIP Alpd Alps Post log Slot slotnumber Steering domainid SupportTopology Users Following is an example of the Show Chassis command Following is an example of the Show Fabric command Following is an example of the Show Domains commandFollowing is an example of the Show Panel command Following is an example of the Show Fdmi WWN command Following is an example of the Show Fdmi commandFollowing is an example of the Show NS local domain command Following is an example of the Show NS portID command Following is an example of the Show NS domainID commandFollowing is an example of the Show Interface command Following is an example of the Show Port command LIPF8F7 Following is an example of the Show Slot command Following is an example of the Show Switch command Following is an example of the Show Topology command Command Line Interface Show Command Following is an example of the Show Version command Show config Show Config CommandBlade slotnumber Following is an example of the Show Config Switch command Following is an example of the Show Config Threshold command Following is an example of the Show Config Zoning command Show Log Command Keywords component Following is an example of the Show Log Options command Following is an example of the Show Log command Show Perf Command Errors portnumber Following is an example of the Show Perf Byte command Show setup Show Setup CommandMfg Following is an example of the Show Setup Snmp command Following is an example of the Show Setup System command Power from the switch Shutdown CommandShutdown Test Command TestPort portnumber testtype Status Test port x internal Command Line Interface Test Command Examples The following is an example of the Uptime command Uptime CommandAuthority None Syntax uptime User Command Keywords accountsAdd Delete accountname Following is an example of the User Add command Following is an example of the User Edit command Following is an example of the User Delete command Following is an example of the User List command Following is an example of the Whoami command Whoami CommandWhoami Zone Command Syntax zone Members zone Remove zone memberlistRename zoneold zonenew Type zone zonetype Following is an example of the Zone Members command Following is an example of the Zone Zonesets command Zoneset Command Syntax zoneset Following is an example of the Zoneset List command Remove zoneset zonelistRename zonesetold zonesetnew Zones zoneset Following is an example of the Zoneset Zones command Zoning Command Opens a Zoning Edit session Following is an example of the Zoning Limits command Following is an example of the Zoning List command E2JBOD2 59043-03 a 107 Command Line Interface Zoning Command 108 59043-03 a Access Control List Zone Administrative StateBootP Class 2 Service Class 3 Service Configured Zone SetsDefault Visibility Fabric Management Switch Input Power LED Inter-Switch LinkMaintenance Button Maintenance Mode Output Power LED Over Temperature LEDPower On Self Test Post Principal Switch User Account Security Virtual Private Fabric ZoneWorldwide Name WWN ZonePage Index Numerics Index-2 59043-03 a 59043-03 a Index-3 Index-4 59043-03 a 59043-03 a Index-5 Index-6 59043-03 a 59043-03 a Index-7