Q-Logic 64 Passwd Command, Changes a user account’s password, Passwd accountname, Accountname

D

B – Command Line Interface Passwd Command

Passwd Command

Changes a user account’s password.

Authority	Admin account name and an admin session to change another account’s
	password; You can change you own password without an Admin session.
Syntax	passwd [account_name]
Keywords	[account_name]
	The user account name. To change the password for an account name other than
	your own, you must open an admin session with the account name Admin. If you
	omit [account_name], you will be prompted to change the password for the
	current account name.
Examples	The following is an example of the Passwd command:
	SANbox2 (admin) #> passwd user2
	Press 'q' and the ENTER key to abort this command.
	account OLD password	:
	account NEW password (4-20 chars)	:

please confirm account NEW password: password has been changed.

59043-03 A B-25