Q-Logic 64 manual Image Command, Cleanup, Fetch accountname ipaddress filesource filedestination

D

B – Command Line Interface Image Command

Image Command

	Manages and installs switch firmware.
Authority	Admin session
Syntax	image
	cleanup
	fetch [account_name] [ip_address] [file_source] [file_destination]
	list
	unpack [file]
Keywords	cleanup
	Removes all firmware image files from the switch. All firmware image files are
	removed automatically each time the switch is reset.
	fetch [account_name] [ip_address] [file_source] [file_destination]
	Retrieves image file given by [file_source] and stores it on the switch with the file
	name given by [file_destination]. The image file is retrieved from the device with
	the IP address given by [ip_address] and an account name given by
	[account_name]. If an account name needs a password to access the device, the
	system will prompt you for it.
	list
	Displays the list of image files that reside on the switch.
	unpack [file]
	Installs the firmware file given by [file]. After unpacking the file, a message
	appears confirming successful unpacking. The switch must be reset for the new
	firmware to take effect.
Notes	To provide consistent performance throughout the fabric, ensure that all switches
	are running the same version of firmware.
	Use the Hotreset command to perform a non-disruptive activation for firmware
	versions that follow version 2.0.

59043-03 A B-23