Q-Logic 64 manual Set Log Command, Set log, Archive, Component list

B – Command Line Interface Set Log Command

D

Set Log Command

	Specifies the type of entries to be entered in the event log. Log entries are created
	for ports, components, and event severity levels.
Authority	Admin session
Syntax	set log
	archive
	clear
	component [list]
	level [level]
	port [port_list]
	restore
	save
	start (default)
	stop
Keywords	archive
	Collects the most recent 200 entries plus the previous 1000 entries and stores the
	result in new file named logfile that is maintained in switch memory where it can
	be downloaded using FTP. To download logfile, open an FTP session, log in with
	account name/password of “images” for both, and type “get logfile”.
	clear
	Clears all log entries.
	component [list]
	Specifies one or more components to monitor for events. Use <space> to delimit
	values in the list. Choose one or more of the following values:
	All
	Monitors all components. To maintain optimal switch performance, do not
	use this setting with the Level keyword set to Info.
	Blade
	Monitors modular circuit boards in cabinets, racks, and high-port-count
	switches.
	Chassis
	Monitors chassis hardware components such as fans and power supplies.
	Eport
	Monitors all E_Ports.
	Mgmtserver
	Monitors management server status.
	Nameserver
	Monitors name server status.
	None
	Monitor none of the component events.

B-54 59043-03 A