Q-Logic 64 manual Send Arbff True instead of IDLEs

D

B – Command Line Interface Set Config Command

Table B-12. Set Config Port Parameters (Continued)

Parameter	Description
PortType	Port mode: GL, G, F, FL, Donor. The
	default is GL.
SymbolicPortName	Descriptive name. The default is Port.
ALFairness	Arbitration loop fairness. Enables (True)
	or disables (False) the switch’s priority
	to arbitrate on the loop. The default is
	False.
DeviceScanEnabled	Enables (True) or disables (False) the
	scanning of the connected device for
	FC-4 descriptor information during
	login. The default is True.
ForceOfflineRSCN	Enables (False) or disables (True) the
	immediate transmission of RSCN
	messages when communication
	between a port and its device is
	interrupted. If enabled, the RSCN
	message is queued for 200 ms. The
	default is False. This parameter is
	ignored if IOStreamGuard is enabled.
ARB_FF	Send ARB_FF (True) instead of IDLEs
	(False) on the loop. The default is
	False.
InteropCredit	Interoperability credit. The number of
	buffer-to-buffer credits per port. 0
	means the default (12) is unchanged.
ExtCredit	Extended credits. The number of port
	buffer credits that this port can acquire
	from donor ports. The default is 0.
FANEnable	Fabric address notification. Enables
	(True) or disables (False) the
	communication of the FL_Port address,
	port name, and node name to the
	logged-in NL_Port. The default is True.
LCFEnable	Link control frame preference routing.
	Enables (True) or disables (False)
	preferred routing of frames with R_CTL
	= 1100 (Class 2 responses). The default
	is False. Enabling LCFEnable will
	disable MFSEnable.

59043-03 A B-43