Q-Logic 64 manual Table B-15. Set Config Threshold Parameters

B – Command Line Interface Set Config Command

D

Table B-15. Set Config Threshold Parameters

Parameter		Description
Threshold Monitoring Enabled	Master enable/disable parameter for all
	events. Enables (True) or disables (False)
	the generation of all enabled event alarms.
	The default is False.
CRCErrorsMonitoringEnabled	The event type enable/disable parameter.
DecodeErrorsMonitoringEnabled	Enables (True) or disables (False) the
ISLMonitoringEnabled	generation of alarms for each of the
LoginMonitoringEnabled	following events:
LogoutMonitoringEnabled	„	CRC errors
LOSMonitoringEnabled	„	Decode errors
	„	ISL connection count
	„	Device login errors
	„	Device logout errors
	„ Loss-of-signal errors
Rising Trigger	The event count above which a rising
	threshold alarm is logged. The switch will
	not generate another rising threshold
	alarm for that event until the count
	descends below the falling threshold and
	again exceeds the rising threshold.
Falling Trigger	The event count below which a falling
	threshold alarm is logged. The switch will
	not generate another falling threshold
	alarm for that event until the count
	exceeds the rising threshold and
	descends again below the falling
	threshold.
Sample Window	The period of time in seconds in which to
	count events.

B-48 59043-03 A