Q-Logic 64 manual SANbox2 Installation Disk Linux Installation, Configure the Switch

D

4 – Installation Installing a Switch

4.2.10

SANbox2 Installation Disk - Linux Installation

To install the SANbox Manager application on Linux from the SANbox2 Installation Disk, do the following:

1.Close all programs currently running, and insert the SANbox2 Installation Disk into the management workstation CD-ROM drive.

2.Open the File Manager and double-click on the CD-ROM icon.

3.Double click the SANbox_Manager folder, then double click the Linux folder.

4.Double click the executable file and follow the SANbox Manager installation instructions.

4.2.10.1

SANbox2 Installation Disk - Solaris Installation

To install the SANbox Manager application on Solaris from the SANbox2

Installation Disk, do the following:

1.Close all programs currently running, and insert the SANbox2 Installation Disk into the management workstation CD-ROM drive.

2.Open a terminal window. If the disk isn’t already mounted, enter the following command:

mount /mnt/cdrom

3.Move the directory on the disk that contains the executable. Enter the following command:

cd cdrom/cdrom0/sanbox~1/solaris

4.Run the executable and follow the SANbox Manager installation instructions. Enter the following command:

pkgadd -d sol_pkg

4.2.11

Configure the Switch

Do the following to configure a switch using the SANbox Manager application. Refer to the SANbox2-64 Switch Management User’s Guide for more information about configuring a switch. You can also configure the switch using the Command Line Interface. Refer to Appendix B Command Line Interface for more information.

1.Connect to the switch using an Ethernet connection and run SANbox Manager.

2.Open the Fabric menu and select Add Fabric to open the Add a New Fabric window.

3.Enter a fabric name and the IP address of the switch through which to manage the fabric. The default IP address is 10.0.0.1. If this is a new switch,

59043-03 A 4-15