Q-Logic 64 manual Slot and Fibre Channel Port Numbering

D

2 – General Description Chassis Hardware

numbered 0–63 from top to bottom according to slot number as shown in

Figure 2-2. For example, the ports 0–7 are always associated with the I/O blade in slot #1; ports 8–15 are always associated with slot #2, and so on. For example, if there were no I/O blade in slot #1, I/O blade #2 would retain the 8–15 port numbering.

Slot #0	Slots #1–#4			Slot #5	Slots #6–#9		Slot #10
0	8	16	24	32	40	48	56
1	9	17	25	33	41	49	57
2	10	18	26	34	42	50	58
3	11	19	27	35	43	51	59
4	12	20	28	36	44	52	60
5	13	21	29	37	45	53	61
6	14	22	30	38	46	54	62
7	15	23	31	39	47	55	63

Figure 2-2. Slot and Fibre Channel Port Numbering

The base SANbox2-64 switch comes with I/O blades in slots 1 and 9. You can expand the switch to 24, 32, 40, 48, 56, or 64 ports by installing 1, 2, 3, 4, 5, or 6 additional I/O blades. Install additional I/O blades in open slots in the following order:

„3rd I/O blade in slot 2

„4th I/O blade in slot 8

„5th I/O blade in slot 3

„6th I/O blade in slot 7

„7th I/O blade in slot 4

„8th I/O blade in slot 6

59043-03 A 2-3