Q-Logic 64 manual Show Config Command, Show config, Blade slotnumber

B – Command Line Interface Show Config Command

D

Show Config Command

Displays switch, I/O blade, port, alarm threshold, security, and zoning for the current configuration.

Authority	None
Syntax	show config
	blade [slot_number]
	port [port_number]
	security
	switch
	threshold
	zoning
Keywords	blade [slot_number]
	Displays configuration parameters for the I/O blade or cross-connect blade that
	occupies the slot given by [slot_number]. If you omit [slot_number], the
	configuration parameters for all I/O and cross-connect blades are displayed.
	port [port_number]
	Displays configuration parameters for the port number given by [port_number].
	Ports are numbered beginning with 0. If [port_number] is omitted, all ports are
	specified.
	security
	Displays the security database Autosave parameter value.
	switch
	Displays configuration parameters for the switch.
	threshold
	Displays alarm threshold parameters for the switch.
	zoning
	Displays zoning configuration parameters for the switch.
Examples	The following is an example of the Show Config Port command:
	SANbox2 #> show config port 3
	Port Number: 3
	------------
	AdminState	Offline
	LinkSpeed	Auto
	PortType	GL
	SymbolicName	Port3
	ALFairness	False
	DeviceScanEnabled	True
	ForceOfflineRSCN	False
	ARB_FF	False
	InteropCredit	0

B-78 59043-03 A