Q-Logic 64 manual Following is an example of the Set Config Threshold command

B – Command Line Interface Set Config Command

D

The following is an example of the Set Config Threshold command:

SANbox2 #> admin start

SANbox2 (admin) #> config edit

SANbox2 (admin-config) #> set config threshold

A list of attributes with formatting and current values will follow.

Enter a new value or simply press the ENTER key to accept the current value. If you wish to terminate this process before reaching the end of the list

press 'q' or 'Q' and the ENTER	key to do so.
ThresholdMonitoringEnabled	(True / False)	[False]
CRCErrorsMonitoringEnabled	(True / False)	[True]
RisingTrigger	(decimal value, 1-1000)	[25 ]
FallingTrigger	(decimal value, 0-1000)	[1 ]
SampleWindow	(decimal value, 1-1000 sec) [10 ]
DecodeErrorsMonitoringEnabled	(True / False)	[True]
RisingTrigger	(decimal value, 1-1000)	[200	]
FallingTrigger	(decimal value, 0-1000)	[0 ]
SampleWindow	(decimal value, 1-1000 sec) [10 ]
ISLMonitoringEnabled	(True / False)	[True]
RisingTrigger	(decimal value, 1-1000)	[2 ]
FallingTrigger	(decimal value, 0-1000)	[0 ]
SampleWindow	(decimal value, 1-1000 sec) [10 ]
LoginMonitoringEnabled	(True / False)	[True]
RisingTrigger	(decimal value, 1-1000)	[5 ]
FallingTrigger	(decimal value, 0-1000)	[1 ]
SampleWindow	(decimal value, 1-1000 sec) [10 ]
LogoutMonitoringEnabled	(True / False)	[True]
RisingTrigger	(decimal value, 1-1000)	[5 ]
FallingTrigger	(decimal value, 0-1000)	[1 ]
SampleWindow	(decimal value, 1-1000 sec) [10 ]
LOSMonitoringEnabled	(True / False)	[True]
RisingTrigger	(decimal value, 1-1000)	[100 ]
FallingTrigger	(decimal value, 0-1000)	[5 ]
SampleWindow	(decimal value, 1-1000 sec)	[10	]

B-52 59043-03 A