Q-Logic 64 manual Copy groupsource groupdestination, Create group type, Edit group member

D

B – Command Line Interface Group Command

copy [group_source] [group_destination]

Creates a new group named [group_destination] and copies the membership into it from the group given by [group_source].

create [group] [type]

Creates a group with the name given by [group] with the type given by [type]. A group name must begin with a letter and be no longer than 64 characters. Valid characters are 0-9, A-Z, a-z, _, $, ^, and -. The security database supports a maximum of 16 groups. If you omit [type], ISL is used. [type] can be one of the following:

ISL

Configures security for attachments to other switches.

Port

Configures security for attachments to N_Port devices.

MS

Configures security for attachments to N_Port devices that are issuing management server commands.

edit [group] [member]

Initiates an editing session in which to change the attributes of a worldwide name given by [member] in a group given by [group]. Member attributes that can be changed are described in Table B-4:

	Table B-4. Group Member Attributes
Attribute	Description
DomainBinding	Binds the ISL group member worldwide name to the specified
	switch domain ID. This option is available only if
	FabricBindingEnabled is set to True using the Set Config
	Security command. Refer to the ”Set Config Command” on
	page B-42. 0 (zero) specifies no binding.
Authentication	Type of authentication to use:
	„ None – no authentication
	„ CHAP – Challenge Handshake Authentication Protocol
	(ISL and Port groups only)
	„ MD5 – MD5 hash function (MS groups only)
	„ SHA-1 – SHA-1 hash function (MS groups only)
Secret	16-byte (ISL and Port groups) or 20-byte (MS groups) hex
	string used for authentication purposes. Applies only for CHAP,
	MD5, and SHA-1 authentication.

list

Displays a list of all groups and the security sets of which they are members. This keyword is available without an Admin session.

59043-03 A B-13