Q-Logic 64 manual Securityset Command

B – Command Line Interface Securityset Command

D

Securityset Command

Manages security sets in the security database.

Authority Admin session and a Security Edit session. Refer to the ”Security Command” on page B-35for information about starting a Security Edit session. The Active, Groups, and List keywords are available without an Admin session. You must close the Security Edit session before using the Activate and Deactivate keywords.

Syntax securityset

activate [security_set] active

add [security_set] [group_list]

copy [security_set_source] [security_set_destination] create [security_set]

deactivate

delete [security_set] groups [security_set] list

remove [security_set] [group]

rename [security_set_old] [security_set_new]

Keywords activate [security_set]

Activates the security set given by [security_set]. This keyword deactivates the active security set. Close the Security Edit session using the Security Save or Security Cancel command before using this keyword.

active

Displays the name of the active security set. This keyword is available without an Admin session.

add [security_set] [group_list]

Adds one or more groups given by [group_list] to the security set given by [security_set]. Use a <space> to delimit multiple group names in [group_list]. A security set can have a maximum of three groups with no more than one group of each group type.

copy [security_set_source] [security_set_destination]

Creates a new security set named [security_set_destination] and copies into it the membership from the security set given by [security_set_source].

create [security_set]

Creates the security set with the name given by [security_set]. A security set name must begin with a letter and be no longer than 64 characters. Valid characters are 0-9, A-Z, a-z, _, $, ^, and -. The security database supports a maximum of 4 security sets.

deactivate

Deactivates the active security set. Close the Security Edit session before using this keyword.

B-38 59043-03 A