Q-Logic 64 manual Table B-2. Commands Listed by Authority Level

D

B – Command Line Interface Commands

B.3

Commands

The command set performs monitoring and configuration tasks. Commands related to monitoring tasks are available to all account names. Commands related to configuration tasks are available only within an admin session by accounts with Admin authority. An account must have Admin authority to enter the Admin Start command, which opens an admin session. Some configuration commands, such as the Security command, are available only to the Admin account name. Refer to the ”Admin Command” on page B-4.

The commands and their page numbers are listed in Table B-2.

Table B-2. Commands Listed by Authority Level

Monitoring Commands		Configuration Command
Help	(B-17)	Admin	(B-4)
History	(B-19)
		Admin Session Commands
Ping	(B-26)
Ps	(B-27)
		Alias1	(B-5)
Quit	(B-28)
		Config1	(B-7)
Show	(B-63)
		Date1	(B-10)
Show Config	(B-78)
Show Log	(B-81)	Fallback	(B-11)
Show Perf	(B-83)	Group1	(B-12)
Show Setup	(B-85)	Hardreset	(B-16)
Uptime	(B-92)	Hotreset	(B-20)
Whoami	(B-96)	Hotswap	(B-21)
		Image	(B-23)
		Lip	(B-24)
		Passwd	(B-25)
		Reset	(B-29)
		Security	(B-35)
		Securityset1	(B-38)
		Set1	(B-40)
		Set Config	(B-42)
		Set Log	(B-54)
		Set Port	(B-57)
		Set Setup	(B-58)
		Shutdown	(B-88)
		Test	(B-89)
		User1 2	(B-93)
		Zone1	(B-97)
		Zoneset1	(B-101)
		Zoning1	(B-104)

1Some keywords do not require an Admin session.

2Some keywords can be executed only by the Admin account name.

59043-03 A B-3