Chapter 3

Advanced Configuration

MTU  MTU is the Maximum Transmission Unit. It specifies the largest packet size permitted for Internet transmission. Select Manual if you want to manually enter the largest packet size that is transmitted. To have the Router select the best MTU for your Internet connection, keep the default setting, Auto.

Size  When Manual is selected in the MTU field, this option is enabled. Leave this value in the 1200 to 1500 range. The default size depends on the Internet Connection Type:

•• DHCP, Static IP or Telstra: 1500

•• PPPoE: 1492

•• PPTP or L2TP: 1460

Network Setup

The Network Setup section changes the settings on the network connected to the Router's Ethernet ports.Wireless setup is performed through the Wireless tab.

Router IP

This presents both the Router's IP Address and Subnet Mask as seen by your network.

Router IP

DHCP Server Setting

The settings allow you to configure the Router's Dynamic Host Configuration Protocol (DHCP) server function. The Router can be used as a DHCP server for your network. A DHCP server automatically assigns an IP address to each computer on your network. If you choose to enable the Router's DHCP server option, make sure there is no other DHCP server on your network.

DHCP Server Setting

DHCP Server  DHCP is enabled by factory default. If you already have a DHCP server on your network or you don't want a DHCP server, then select Disabled (no other DHCP features will be available).

DHCP Reservation  Click this button if you want to assign a fixed local IP address to a MAC address.

DHCP Reservation

You will see a list of DHCP clients with the following information: Client Name, Interface, IP Address and MAC Address.

DHCP Reservation

•• Select Clients from DHCP Table  Click the Select tick box to reserve a client's IP address. Then click Add Clients.

•• Manually Adding Client  To manually assign an IP address, enter the client's name in the Enter Client Name field. Enter the IP address you want it to have in the Assign IP Address field. Enter its MAC address in the To This MAC Address field. Then click Add.

Clients Already Reserved

A list of DHCP clients and their fixed local IP addresses will be displayed at the bottom of the screen. If you want to remove a client from this list, click Remove.

Click Save Settings to apply your changes or click Cancel Changes to cancel your changes. To view the most up-to-date information, click Refresh. To exit this screen, click Close.

Start IP Address  Enter a value for the DHCP server to start with when issuing IP addresses. Because the Router's default IP address is 192.168.1.1, the Start IP Address must be 192.168.1.2 or greater, but smaller than 192.168.1.253. The default Starting IP Address is 192.168.1.100.

Maximum Number of Users  Enter the maximum number of PCs that you want the DHCP server to assign IP addresses to. This number cannot be greater than 253. The default is 50.

IP Address Range  Displayed here is the range of available IP addresses.

Dual-Band Wireless-N Gigabit Router

10

Page 10 Page 12
Page 11
Image 11
Linksys WRT320N manual Network Setup, Router IP, Dhcp Server Setting, Dhcp Reservation, Clients Already Reserved
Page 10 Page 12

WRT320N specifications

The Linksys WRT320N is a wireless router that has garnered attention for its robust performance and feature-rich capabilities, making it an excellent choice for home and small office networks. Part of the renowned WRT series, the WRT320N is designed to elevate your internet experience through its advanced technologies and user-friendly features.

One of the standout features of the WRT320N is its dual-band functionality, allowing users to operate on both the 2.4 GHz and 5 GHz frequencies. This dual-band capability helps to minimize interference, providing a stable connection, especially in environments with multiple devices connected simultaneously. The router supports Wireless-N technology, which enhances the speed and range of wireless connections, making it ideal for streaming videos, online gaming, and large file transfers.

Equipped with four Gigabit Ethernet ports, the WRT320N allows for high-speed wired connections for devices that require stable connectivity, such as gaming consoles, desktop computers, and media servers. This ensures that users can experience minimal latency during online activities while benefitting from high data transfer rates.

Another significant advantage of the WRT320N is its easy-to-use setup and management interface. Users can access the web-based administration panel, which simplifies the process of configuring network settings, parental controls, and security options. The router also supports the Linksys Smart Wi-Fi application, enabling remote management of the network from mobile devices, offering added convenience for users on the go.

In terms of security, the WRT320N is equipped with advanced features to protect your network against unauthorized access. It supports Wi-Fi Protected Access (WPA/WPA2) encryption, ensuring that your data remains secure during transmission. The router also includes a built-in firewall that provides an extra layer of protection for your home network.

The Linksys WRT320N is not only about performance; it is designed with user experience in mind. Its sleek, modern design features a robust casing that not only enhances durability but also ensures optimal heat dissipation during operation. Overall, the WRT320N offers a compelling combination of speed, range, and security tailored for today's connectivity needs, making it a solid addition to any network setup.
Top Page Image Contents