B – Command Line Interface Group Command

D

Group Command

Creates groups, manages membership within the group, and manages the membership of groups in security sets.

Authority Admin session and a Security Edit session. Refer to the ”Security Command” on page B-35for information about starting a Security Edit session. The List and Members keywords are available without an Admin session.

Syntax group

add [group] copy

create [group] [type] delete [group]

edit [group] [member] list

members [group]

rename [group_old] [group_new]

Keywords add [group]

Initiates an editing session in which to specify a group member and its attributes for the group given by [group]. A group name must begin with a letter and be no longer than 64 characters. Valid characters are 0-9, A-Z, a-z, _, $, ^, and -.

Member attributes are described in Table B-3:

 

Table B-3. Group Member Attributes

 

 

Attribute

Description

 

 

Group Member

Switch worldwide name (ISL group) or the worldwide name of

 

the N_Port device that would attach to the switch (Port and MS).

Authentication

Type of authentication to use:

 

„ None – no authentication

 

„ CHAP – Challenge Handshake Authentication Protocol (ISL

 

and Port groups only)

 

„ MD5 – MD5 hash function (MS groups only)

 

„ SHA-1SHA-1 hash function (MS groups only)

Secret

16-byte (ISL and Port groups) or 20-byte (MS groups) hex string

 

used for authentication purposes. Applies only for CHAP, MD5,

 

and SHA-1 authentication.

DomainBinding

Binds the ISL group member worldwide name to the specified

 

switch domain ID. This option is available only if

 

FabricBindingEnabled is set to True using the Set Config

 

Security command. Refer to the ”Set Config Command” on

 

page B-42. 0 (zero) specifies no binding.

 

 

B-12

59043-03 A

Page 134
Image 134
Q-Logic 64 manual Group Command, Syntax group, Keywords add group, Table B-3. Group Member Attributes