Q-Logic 64 manual Fdmi nodewwn, Log option, Ns option

B – Command Line Interface Show Command

D

chassis

Displays chassis component status and temperature.

config [option]

Displays switch, port, and zoning configuration attributes. Refer to the ”Show Config Command” on page B-78.

domains

Displays list of each domain and its worldwide name in the fabric.

donor

Displays list of current donor configuration for all ports.

fabric

Displays list of each domain, symbolic name, worldwide name, node IP address, and port IP address.

fdmi [node_wwn]

Displays information (worldwide name, manufacturer, model, and number of ports) for the device host bus adapter given by [node_wwn]. If you omit [node_wwn], the command displays host bus adapter information for all attached devices.

interface

Displays the status of the active network interfaces.

log [option]

Displays log entries. Refer to the ”Show Log Command” on page B-81.

lsdb

Displays Link State database information.

mem [count]

Displays information about memory activity for the number of seconds given by [count]. If you omit [count], the value 1 is used. Displayed memory values are in 1K block units.

Note: This keyword will display memory activity updates until [count] is reached – it cannot be interrupted. Therefore, avoid using large values for [count].

ns [option]

Displays name server information for the specified [option]. If you omit [option], name server information for the local domain ID is displayed. [option] can have the following values:

all

Displays name server information for all switches and ports.

B-64 59043-03 A