Q-Logic 64 manual Table B-13. Security Configuration Parameters

D

B – Command Line Interface Set Config Command

security

Initiates an editing session in which to change the security settings. The system displays each parameter one line at a time and prompts you for a value. For each parameter, enter a new value or press the Enter key to accept the current value shown in brackets. Enter “q” or "Q" to end the editing session. Table B-13describes the Set Config Security parameters.

Table B-13. Security Configuration Parameters

Parameter	Description
AutoSave	Enables (True) or disables (False) the
	propagation of the active security set to
	all switches in the fabric. The default is
	True.
FabricBindingEnabled	Enables (True) or disables (False) the
	configuration and enforcement of fabric
	binding. Fabric binding associates
	switch worldwide names with a domain
	ID in the creation of ISL groups.

59043-03 A B-45