Q-Logic 64 manual Post log, Slot slotnumber

D

B – Command Line Interface Show Command

Table B-19. Show Port Parameters (Continued)
Entry	Description
RxLinkResets	Number of link reset primitives received from an attached
	device.
RxOfflineSeq	Number of offline sequences received. An OLS is issued
	for link initialization, a Receive & Recognize
	Not_Operational (NOS) state, or to enter the offline state.
TotalErrors	Total number of errors detected.
TotalLIPsRecvd	Number of loop initialization primitive frames received by
	this port.
TotalLIPsXmitd	Number of loop initialization primitive frames transmitted
	by this port.
TotalLinkResets	Total number of link reset primitives.
TotalOfflineSeq	Total number of Offline Sequences issued and received by
	this port.
TotalRxFrames	Total number of frames received by this port.
TotalRxWords	Total number of words received by this port.
TotalTxFrames	Total number of frames issued by this port.
TotalTxWords	Total number of words issued by this port.
TxLinkResets	Number of Link Resets issued by this port.
TxOfflineSeq	Total number of Offline Sequences issued by this port.
TxWaits	Time waiting to transmit when blocked with no credit.
	Measured in FC Word times.

post log

Displays the Power On Self Test (POST) log which contains results from the POST.

setup [option]

Displays setup attributes for the system, SNMP, and the switch manufacturer. Refer to the ”Show Setup Command” on page B-85.

slot [slot_number]

Displays the hardware attributes for the slot given by [slot_number]. [slot_number] can be 0–12. If you omit [slot_number], the hardware configuration for all slots is displayed.

59043-03 A B-67