Attaching the pedestal to TV

Assembling the pedestal

Insert the protrusion of the Neck into the Base firmly.

Neck

Protrusion of the

Neck (bottom)

Turn the stand over and fix stand neck securely with assembly screws.

(for 42”/50”: 3 screws, for 55”/60”: 4 screws)

Do not hold the neck when turning over the stand. B x 3 pcs. (for 42”/50”)

B x 4 pcs. (for 55”/60”)

[TC-P42UT50, TC-P50UT50]

Accessories

Assembly screws

XYN4+F10FNK (Black) size (M4 x 10)

(for 42”/ 50” (5), for 55”/60” (1))

 

 

Front

Hole for

 

 

screw

 

 

 

 

Front

 

 

 

 

Back of Stand

 

 

 

 

[TC-P55UT50,

 

 

 

TC-P60UT50]

Attach the Bracket to the protrusion of Neck.

Attach the cover and fix securely with

Make sure that the bracket is anchored

assembly screw.

 

before fixing the screws.

 

 

A x 1 pcs.

Fix securely with assembly screws. (4 screws)

 

Protrusion of Neck (top)

B x 4 pcs.

 

Cover

Bracket

XYN5+F16FN (silver)

size (M5 x 16)

(for 42”/ 50” (7), for 55”/60” (12))

Bracket (1)

TBL5ZA3238 (for 42”/50”)

TBL5ZA3200 (for 55”/60”)

Neck (1)

TXFBL5Z0069 (for 42”/50”)

TXFBL5Z0085 (for 55”/60”)

Cover (1)

TXFBL5Z0071 (for 42”/50”)

TXFBL5Z0056 (for 55”/60”)

Set-up

Tighten assembly screws (for 42”/50”) / (for 55”/60”) (total 4 screws)

Cover is in the same bag

with Owner’s Manual

loosely at first, then tighten them firmly to fix securely.

Base (1)

 

 

 

TBL5ZX0292 (for 42”)

 

 

TBL5ZX0294 (for 50”)

 

 

TBL5ZX0420 (for 55”)

Rear side

 

TBL5ZX0421 (for 60”)

 

 

 

Arrow

Removing the pedestal from the TV

 

mark

 

Hole for pedestal

Be sure to remove the pedestal in the following way when using

installation

the wall-hanging bracket or repacking the TV.

 

A x 4 pcs. (for 42”/50”)

Remove the assembly screws

(for 42”/50”) /

(for 55”/60”)

from the TV.

 

 

B x 4 pcs. (for 55”/60”)

 

 

Lift the TV from the pedestal.

 

 

Bracket

Remove the assembly screw

from the cover.

 

Base

Pull out the cover.

 

 

(Image)

Work on a flat surface

Remove the assembly screws

from the Bracket.

Remove the assembly screws

from the Back of stand and

 

 

Warning

pull out the neck.

Do not disassemble or modify the pedestal.

Otherwise, the TV may fall over and become damaged, and personal injury may result.

Caution

Do not use any pedestal other than that provided with this TV.

Otherwise, the TV may fall over and become damaged, and personal injury may result.

Do not use the pedestal if it becomes warped or physically damaged.

If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic Dealer immediately.

During set-up, make sure that all screws are securely tightened.

If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.

When removing the pedestal, do not remove the pedestal by any methods other than the specified procedure. (Above)

Otherwise, the TV and/or pedestal may fall over and become damaged, and personal injury may result.

9

 

Page 9
Image 9
Panasonic TC-P55UT50, TC-P50UT50, TC-P42UT50, TC-P60UT50 Attaching the pedestal to TV, Removing the pedestal from the TV