Power cord connection

To attach

To remove

Insert it firmly until the tabs on both sides click into place.

Keep pushing both sides until they snap and pull.

Attaching Ferrite Core

(For TC-P42UT50/TC-P50UT50 only)

Be sure to attach the provided ferrite core to the HDMI cable/USB cable (not supplied) to reduce interference or electrical noise.

Attach the ferrite core as close as possible to connector on the TV side as shown.

Close the ferrite core until it clicks.

(example: USB connector)

Installing the remote’s batteries

Open

Hook

Close

Note the correct polarity (+ or -).

Caution

Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control.

Do not mix old and new batteries.

Do not mix different battery types (such as alkaline and manganese batteries).

Do not use rechargeable (Ni-Cd) batteries.

Do not burn or break batteries.

10

Page 10
Image 10
Panasonic TC-P60UT50 Power cord connection, Attaching Ferrite Core, Installing the remote’s batteries, To attach To remove