Operating Manual U42093-J-Z716-1-74
Configuringthe PSFR-CP41’s Ethernet Port Configuring the PSFR-CP41
Configuring the PSFR-CP41’s Ethernet Port
If youplan to use Ethernet to configure the PSFR-CP41, you must first set up
serial communicationswith the PSFR-CP41 to configure the Ether net port’s
address.
The PSFR-CP41 provides an Ethernet port for connection to a standard
10BaseTEthernet network. You can use Ethernet to perform the followingactiv-
ities:

Configure the PSFR-CP41 through Telnet.

The configuration menus
accessed viathe ser ial port will be disabledwhen a telnet session is
connected.When logging in for a telnet session, use ”root” as the user name
and ”password”as the password.

Upgradingthe PSFR-CP41’s firmware.

Youcan use FTP or TFTP to send a
newfir mwareimage to the PSFR-CP41.
Ifyou plan to use the Ethernet port, you must first configure its address. Youcan
setthe physical address, IP address, and IP subnet mask. The physicaladdress
isassigned to an Ethernet adapter by its manufacturer. The IP address is used
to route information ina TCP/IP network. The IP subnet mask is used to
establisha path to a default TCP/IP gateway.
Tochange the Ethernet physical address, IP address,or IP subnet mask, select
4) Ethernet Configuration from the Configuration menu.