Operating Manual U42093-J-Z716-1-74
SettingUp Serial Port Communications Configuring the PSFR-CP41
Setting Up Serial Port Communications
Leavethe PSFR-CP41 turned off until you have set up serial port communica-
tions with yourhost computer.
Toset up serial communications with the PSFR-CP41:
1. Plug the serial cableprovided with the PSFR-CP41 into one of your
computer’sserial por ts (forexample, COM1 or COM2) and the PSFR-
CP41’sserial por t.
2. Start your terminal interface program.
3. Set the terminal interface programto use the appropr iate COM port.
4. Specifythe following settings for the port:
Beforepowering on the PSFR-CP41, make sure all the devices on the
SCSI busare powered on and have finished performing their self tests.
The deviceson your Fibre Channel Storage Area Network should be
poweredonalso.
5. Poweron the PSFR-CP41.
Baud rate: 9600, 19200, 38400, 57600, or 115200
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None
i