Operating Manual U42093-J-Z716-1-74
Mounting the PSFR-CP41 in a Rack Installing the PSFR-CP41
PSFR-CP41 Serial port
Autobaud Feature
The autobaud featureautomatically configures the baud rate on the PSFR-
CP41. Once you set the baud rate in the terminal emulation program, wait until
thePSFR-CP41completesthePowerOnSelfTest(POST).Thiscantake
approximately25 seconds. Then press the Enter key five or six times and the
PSFR-CP41 will automaticallydetect the baud rate and configure the router.
The baud rateis then saved in the PSFR-CP41’s configuration and will be
retained through future powercycles.
Hitting the Enter keybefore the POST has completed has no effect on
the autobaud feature.Wait until the POST has completed before hitting
the ENTER key.
The baud ratei n the terminal emulation program must be set at 9,600, 19,200,
38,400,57,600, or 115,200 for the autobaud feature to recognize it. The PSFR-
CP41 will not functionproper ly at anyother baud rate.
I
0
Serialport
i