Siemens PSFR-CP41 manual Power Up Menu

Configuring the PSFR-CP41 Power Up Menu

Power Up Menu

When you turn the PSFR-CP41’s power switch, a series of messages similar to the following appear:

Performing Power-on Self Test …
Monitor-flash Check-sum	passed
Program-store Main RAM	passed
Trace Buffer in Main RAM	passed
PCI Protocol RAM (4mb)	passed
SCSI Script RAM	passed
Initializing Ports..
Fibre-channel Port Single-frame Sequence Loopback	passed
Fibre-channel Port Single-frame Sequence Loopback	passed
Ethernet Port Loopback	passed
SCSI Port Loopback	passed
Self test completed successfully
Select which mode to boot :
1. Fibre Channel / SCSI Router
2. Diagnostics Monitor

i

If you do not see messages on your screen, re-check your computer’s serial port settings and press Enter five or six times. In particular, make sure the baud rate is set to one of the values listed in Table “Connection properties”.

The default boot mode is 1) Fibre Channel/SCSI Router and will be automati- cally selected if you wait three seconds. The main menu appears:

Crossroads Systems CP4100 Configuration

Version: X.X XXXX

1)Perform Configuration

2)Display Status of Power-on Self Test

3)Display Trace and Assertion History

4)Reboot

5)Download a New Revision of the Firmware

Command >

The main menu allows for various operations to be performed on the PSFR- CP41.

U42093-J-Z716-1-74 Operating Manual