Operating Manual U42093-J-Z716-1-74
Reboot Configuring the PSFR-CP41
Reboot
The reboot function restarts the PSFR-CP41. This will cause selected configu-
rationoptions to take effect.
This will result in all current operations being interrupted. Do not reboot
the unit during normal operation.
Download Firmware
The PSFR-CP41 uses a serial connection using the XMODEMpr otocol to
update the firmware.In order to update the firmware the PSFR-CP41 mustbe
connected toa ter minal emulation programsuppor ting XMODEM transfers.
This menuitem does not appear when accessing the configuration menus
through telnet.
Fromthe main menu, the user must select the ”Download a new revision of the
Firmware” command to start the download procedure.
Todownload firmware:
Once the message”Downloading” appears in the emulator utility:
1. Use the Transfer(SendFile option in the terminal emulator utility.
2. Select the location of the firmware. Use the ”Browse” button, if you need
help findingit.
3. Make sure you select XMODEM as the protocol.
4. Press the ”Send” button.
5. The firmware will begin to download.
When the downloadis complete, the system verifies that the firmware image
wassuccessfully wri ttento the FLASH memor y and then reboots the PSFR-
CP41. Upon reboot, the PSFR-CP41 detects that there is a newly downloaded
firmwareimage and copies that image to the boot sector of the FLASH and then
boots with that image.At that point the PSFR-CP41 is using the new firmware
image.