Device Management | Configuring the PSFR-CP41 |
Device Management
The PSFR-CP41 can be managed through the RS-232 port, over Ethernet via Telnet Web-Browser, or via SNMP. FTP and TFTP are also supported for firmware downloads.
Serial
The serial port allows for configuration of all device characteristics.
Ethernet/Web-Browser
The 10BaseT Ethernet port must be configured with an appropriate IP address and netmask prior to use. Default values are 1.1.1.1, with a mask of 255.255.255.0.
SNMP
The PSFR-CP41 includes SNMP management support. SNMP is transported via the Ethernet connection (10BaseT port). SNMP support allows configuration and management using any standard SNMP management tool. SNMP data is defined in the SNMP MIB. Provides a private MIB for configuration of the PSFR- CP41. The private MIB includes all objects configurable from the terminal user interface. The private MIB also includes some Fibre Channel and SCSI statistics which are not accessible via the serial interface. SNMP support also includes Traps, which are used to notify a SNMP management console of various condi- tions.
Currently the IETF has no publicly defined specification for a Fibre Channel MIB. The objects defined in the private MIB are specific products.
For a copy of the private MIB, contact a service representative.
Operating Manual | U42093-J-Z716-1-74 |
