U42093-J-Z716-1-74 Operating Manual
Installing the PSFR-CP41 Mounting the PSFR-CP41 in a Rack
To connect the PSFR-CP41 to the SCSI bus:
1. Poweroff your SCSI devices.
2. Connect a SCSI cableto one of the SCSI connectors on the back of the
router.If necessary, use a narrow-to-wide adapter.
3. Connectthe other end of the SCSI cable to the next SCSI device on thebus.
4. If the PSFR-CP41 is at the end of the SCSI bus,place the terminator
providedwith the router on the PSFR-CP41’s other SCSI connector. If the
router is not at the end of the bus,attach a second SCSI cable to the other
SCSI connector. Use a narrow-to-wide adapter, if necessary. Connect this
cableto the next device on the bus.
PSFR-CP41 SCSI connection
I
0
SCSI Connectors