Operating Manual U42093-J-Z716-1-74
Mounting the PSFR-CP41 in a Rack Installing the PSFR-CP41
SCSI terminator
6. Poweron your SCSI devices.
7. Afterall the SCSI devices have completed their individual POSTs, power on
the PSFR-CP41.
Ethernet Connection
10BaseTEther net connectivity is used to provide enhanced management and
configurationcapabilities. The RJ-45 connector on the unit can be directly
connected toa standard 10BaseT Ether net network.
Youmustfirst set the network address via the serial por t to use the configuration
capabilitiesof the Ethernet port. Refer to Chapter “Configuring the PSFR-CP41”
fordetails on setting the network address.
Ethernet capabilities include Telnetand HTTP Interface (Web Browser) for
configuration,FTP and TF TP forfirmware upgrades, and SNMP for configu-
rationand management.
5. Makesure the bus is terminated
correctly.The devices at each end
ofthe bus must be terminated.