U42093-J-Z716-1-74 Operating Manual
Configuring the PSFR-CP41 Perform Configuration
Fibre Channel Configuration
Thisoption allows for setting the Fibre Channel Address method, hard address
value,and WWN overrides.
Whenconfiguring the Fibre ChannelAL_PA, the PSFR-CP41 will present a list
of loop addresses along withthe corresponding AL_PA. The user selects the
loop address desired.
SCSI Configuration
This option allowsfor setting the SCSI Initiator ID, enabling SCSI TargetIDs,
and setting the SCSIbus reset behavior.
Fibre Channel Configuration Menu
Version: X.X XXXX
Current Fibre Channel Configuration:
World Wide Name High: 0x10000011
World Wide Name Low: 0x10000001
Use Hard ALPA: No
1) Change World Wide Name High
2) Change World Wide Name Low
3) Toggle Hard ALPA Usage
X) Return to previous menu
SCSI Configuration Menu
Version: X.X XXXX
Current SCSI Configuration:
Initiator SCSI ID: 7
Target SCSI ID(s):
Reset SCSI Bus on Boot: Yes
1) Change Initiator SCSI ID
2) Add Target SCSI ID
3) Remove Target SCSI ID
4) Toggle SCSI Reset Operation
X) Return to previous menu