Operating Manual U42093-J-Z716-1-74
Mounting the PSFR-CP41 in a Rack Installing the PSFR-CP41
Toreduce injury or equipment damage, the mounting brackets must be
level.If the brackets are not level, the PSFR-CP41 cannot be installed
correctly.
5. Locate the front of the mounting
brackets.
6. Attach the bracketsto the front
mountingrails, using two screws on
each side.Be sure to use only the
top and bottom holes in each
bracket.(The middle holes will be
usedto attach the front cover panel
after the unit is installed.) Tighten
the screwssecurely.
!