U42093-J-Z716-1-74 Operating Manual
Configuring the PSFR-CP41 Perform Configuration
SCSI-to-Fibre Channel Mapping Configuration
Thisoption allows modification of the table mapping SCSI Target:LUN valuesto
Fibre Channel Node:LUN values.
Configurationof these devices is similar to that for indexed addressing, without
the user assists.Pr ior to configuring these tables,the user must enable the
SCSItarget and initiator addresses desired to enable the mapping for that SCSI
device.
This is not used in Siemens Configurations.
TraceSettings C onfiguration
Thisoption allows trace levels to be set. This should not be modified in normal
operation,as performance degradation may result.
Furtherinformation on using this interface can be located in the troubleshooting
sectionof the manual.
Fibre Channel to SCSI Configuration Menu
Version: X.X XXXX
Current Fibre Channel to SCSI Mapping Mode is Indexed
1
) Display Attached SCSI Devices, LUN Priority
2
) Display Attached SCSI Devices, Target ID Priority
3
) Display Attached SCSI Devices, Bus Number Priority
4
) Change the Fibre Channel to SCSI Mapping Mode
5
) Show/Edit Fibre Channel to SCSI Mapping Table
X
) Return to Previous Menu
Trace Settings
Version: X.X XXXX
Level0:ON Level1:ON
Level 2 : OFF Level3:OFF
Level 4 : OFF Level5:OFF
Level 6 : OFF Level7:OFF
U) Update Current Operating Trace Levels
X) Return to previous menu