Schneider Electric 840 USE 106 0 manual NOE Configuration and Hot Standby

Ethernet Hot Standby Solution

NOE Configuration and Hot Standby

TCP/IP	When an NOE goes into service the first time, the NOE attempts to get its IP Address
Configuration	from a BOOTP server. If no BOOTP server is available, the NOE derives its IP
	Address from its MAC address. Connecting to a BOOTP server or deriving the IP
	Address from a MAC address allows you a connection to the NOE, that enables you
	to download a project to the PLC.
	All standard rules apply to IP addressing with the additional restriction that the IP
	address cannot be greater than 253 or broadcast address minus 2. Also, no other
	device can be assigned the configured IP + 1 address.

840 USE 106 00 January 2003 167