English-5-20
CAUTION
The connection to SMO-210DN is unavailable for about 2~5 minutes
after powering on your DSLModem.
Since the connection is not available, as the IPis not
received from DSLcommunica-tions,
please reboot by turning off the power of DSL
Modem and SMO-210DN for more than 5 seconds,and then try to connect again.
5-10) ADJUST SETUP•
Function:Allows adjustment of the display status
•
Setting method:Move to #1. ADJUST MENU by using
KEYand press the ENTER
SWITCH to display the OSD as shown in the figure below. (The figure shows the initial setting
status.)
Move to a target item by using
KEY.
Enter the item by pressing the ENTER SWITCH.
At this time, set a target value by using
¥
KEY.
You can move to another item by using
KEYafter setting the target value.
(1) CONTRAST: Adjusts the contrast of the picture.
(2) BRIGHT: Adjusts screen luminance.
(3) COLOR :Adjusts color intensity.
(4) TINT: Works with the color adjustment to create the correct color imaging.
(5) SHARPNESS :Adjusts the detail of the image.
05/01/05 00:00:01
CONTRAST 50
BRIGHT 50
COLOR 50
SHARPNESS 50
TINT 50
ADJUST SETUP