English-5-4

5-2) RECORD MODE
1. RECORD TYPE
- Select channel to simultaneously record video and audio.
- [ALL/CH1/CH2/CH3/CH4/CH5/CH6/CH7/CH8]
- Set the channel on which audio is to be recorded or select ON/OFF using
,
,
¥
,

key.
Use key to change selection.
- Selected channel will be shown as S on screen.
- Upon selecting ALL in the menu, although you choose SINGLE CH, if the singal comes out to
MULTI CH, “S” marker is displayed on the screen.
- In the SINGLE CH mode, when you record the signal and playback what is recorded on the
HDD, “CHANGE MODE” is displayed and playback SINGLE CH only.
Also, when you will change mode to “MULTI CH” while the SINGLE CH is playback
“1CH PB MODE” marker on the screen is displayed and you can’t change to MULTI CH.
Press the STOPKEY to change to MULTI CH.
2. PICTURE QUALITY
- Quality of the video to be recorded is defined in three stages. HIGH means quality of the video to
be recorded is the highest, then NORMAL, then LOW.
[NORMAL/HIGH/LOW]
- Select video quality using
,
,
¥
,

key. Use key to change it.
05/01/05 00:00:01
RECORD TYPE OFF
PICTURE QUALITY Normal
PICTURE RATE 60 IPS
DISK END MODE STOP
DISK END ALARM TONE 0N
RECORD TIME MARK 0N
RECORD TITLE MARK 0N
RECORD MODE