English-5-13
Static IPUser
- Constituted by Static IPon the TCP/IP network
1) Move to ‘STATIC...’by using
KEYat NETWORK ACCESS, then press ENTER SWITCH
to set STATIC...
(STATIC : Select in case the network configuration of monitor is fixed IP(Public or Private IP)
2) Move to IPADDR / GATEWAY/ SUBNETMASK by using
KEY.
3) Press ENTER SWITCH and type in IPADDR / GATEWAY/ SUBNETMASK respectively.
4) DNS 1 and DNS 2 will be automatically set to DNS as shown above.
Use
KEYto change it.
05/01/05 00:00:01
STATIC ACCESS
IP ADDR 192.168.1.200
GATEWAY 192.168.1.65
SUBNETMASK 255.255.255.0
DNS 1 168.126.63.001
DNS 2 168.126.63.002
DHCPUser
- Constituted by Dynamic IPon the cable/xDSL modem network
You can use the SMO-210DN products through the network using Dynamic IPon cable/xDSL
modem. In this case, it should be connected with DDNS to support the Dynamic IP.
In case of a configuration using DHCP, as the connection to SMO-210DN is made using domain
names (EX : http://wff0000.websamsung.net) that are automatically registered in our DDNS server,
IPaddress, Subnet Maskand Gateway that are in the network tab of Admin Mode are not necessarily
to be inputted.
The proper domain names of SMO-210DN are automatically registered to DDNS server installed in
our company in case of modem connection.The default IPtype is DHCP .
1) Connect as the figure below and turn on the power of the equipment in the
order shown.
❶ ❸❷