English-5-5
3. PICTURE RATE
- Set numbers of fields to be recorded.
- Maximum number is 60 IPS.
[1/2.5/5/7.5/10/15/30/60 IPS]
- Select page number per second using
,
,
¥
,
key. Use key to change it.
❇ When CH1 is recorded, the page number per second is 30 IPS per CH regardless of picture rate.
4. DISK END MODE
- Setting to STOPwill stop recording when HDD becomes full during recording.
- Setting to CONTINUE will overwrite previously recorded data with the one currently being
recorded. The oldest data saved in HDD will get overwritten first.
[CONTINUE/STOP]
- Use
,
,
¥
,
, key to change the setup.
5. DISK END ALARM TONE (Notice Mode when HDD is full)
- When DISK END MODE is set to STOP, setting this to ON will make ALARM TONE ring when
HDD is full during recording. If it is set to OFF, ALARM TONE will not ring. This feature won’t
be activated unless DISK END MODE is set to STOP.
[ON/OFF]
- Use
,
,
¥
,
,key to change the setup.
6. RECORD TIME MARK
- Setting to ON will show the time when the recording is done during playback, Setting to OFF will not
show it.
[ON/OFF]
- Use
,
,
¥
,
, key to change ON or OFF.
7. RECORD TITLE MARK
- Settingto ON will show the title when the recording is done during playback, Setting to OFF will not
show it.
[ON/OFF]
- Use
,
,
¥
,
, key to make change.
4
8
16
24
32
48
96
240
7.5
3.75
1.875
1.25
0.9375
0.625
0.3125
0.125
60
30
15
10
7.5
5
2.5
1
INTERVAL IPS(1ch) IPS(8ch total)