English-8-255. Network Status Notification
When there is a change in the setting sta
tus of the SMO-210DN Server, it sends e-mails to the
people who want it. Set Mail Notification to "Enable" to send the network setting status of the
SMO-210DN Server to the specified e-mail addresses as follows:
There are some conditions required for this setting.
1) DHCPClient has been set in "Network Configuration" menu and an IP has been assigned from the
actual DHCPServer to make communication possible.
2) PPPClient has been set in "PPPoE" menu and communication has become possible through the con-
nection with ISPor PPP Server.
- Menu Configuration
Mail Notification E-mail forwarding or not.
Enable : Forward E-mails.
Disable : Doesn’t forward E-mails.
SMTPServer Type in the address of the server that provides e-mail relay
function.
Authentication Login Shows if the ISPhas an authentication for the use of SMTP.
User ID ID for Authentication Login
Password Password for Authentication Login
Sender(Email Address) Type in the addresses of the sender.
Recipient1’s Type in the addresses of the recipients.
Email Address (3 addresses maximum.)
click "Network Status Notify" in the Network Configuration group.
Choose to use the Mail Notification function or not. Choose "Enable" if you want to notify the network
status of the SMO-210DN Server to people through e-mails.
Type the address of the SMTPServer.
* SMTPServer plays a part as a relay that receives the mail of the user and delivers it
to the receiver.
Set "Authentication Login" to enable and type in the ID and password assigned from the SMTPserver.
Type the e-mail address of the person who receives the E-mail. Maximum 3 people can receive the mail.
Type the message you want to add in "User Defined Message".
After completing setting, click Apply button.