Dell 9.7(0.0) Show running-config bgp, Field Description Time Established Display Example Day

Field	Description
	Time Established	Display Example
	< 1 day	00:12:23 (hours:minutes:seconds)
	< 1 week	1d21h (DaysHours)
	> 1 week	11w2d (WeeksDays)
State/Pfxrcd	If the neighbor is in Established stage, the number of
	network prefixes received.
	If a maximum limit was configured with the neighbor
	maximum-prefixcommand, (prfxd) appears in this
	column.
	If the neighbor is not in Established stage, the current stage
	is displayed (Idle, Connect, Active, OpenSent,
	OpenConfirm). When the peer is transitioning between
	states and clearing the routes received, the phrase (Purging)
	may appear in this column.
	If the neighbor is disabled, the phrase (Admin shut) appears
	in this column.

Example	Dell#show ip bgp summary
	BGP router identifier 192.168.11.5, local AS number 100
	BGP local RIB : Routes to be Added 0, Replaced 0, Withdrawn 0
	2	network entrie(s) using 152 bytes of memory
	2	paths using 208 bytes of memory
	BGP-RIB over all using 210 bytes of memory
	2	BGP path attribute entrie(s) using 144 bytes of memory
	1	BGP AS-PATH entrie(s) using 10 bytes of memory
	2	neighbor(s) using 16384 bytes of memory
	Neighbor		AS	MsgRcvd	MsgSent	TblVer
	InQ OutQ Up/Down			State/Pfx	8	0
	172.16.0.2		200	10

00 00:05:34 2

192.168.10.2 100 0 22 0

00 00:00:00 (shut)

Dell#

show running-config bgp

To display the current BGP configuration, use this feature.

S6000

Syntax show running-config bgp

Defaultsnone

452 Border Gateway Protocol