VersionDescription

9.7(0.0)

Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

9.0.0.0Introduced on the Z9000.

8.3.19.0Introduced on the S4820T.

8.3.12.0Introduced on the S4810.

8.3.11.1Introduced on the Z9000.

7.6.1.0Introduced on the C-Series and S-Series.

7.4.1.0Introduced on the E-Series.

Usage

The authenticator completes authentication only when you set port-controlto

Information

auto.

dot1x quiet-period

Set the number of seconds that the authenticator remains quiet after a failed authentication with a client.

Syntax

Parameters

Defaults

Command Modes

Command History

dot1x quiet-period seconds

To disable quiet time, use the no dot1x quiet-timecommand.

seconds

Enter the number of seconds. The range is from 1 to 65535.

 

The default is 60.

60seconds

INTERFACE

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0)

Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

9.0.0.0Introduced on the Z9000.

8.3.19.0Introduced on the S4820T.

8.3.12.0Introduced on the S4810.

7.6.1.0Introduced on the C-Series and S-Series.

802.1X

171

Page 171
Image 171
Dell 9.7(0.0) manual Auto, Dot1x quiet-period seconds