Dell 9.7(0.0) manual Set local-preference value, Value

Related	set automatic-tag — computes the tag value of the route.
Commands
	set metric — specifies the metric value assigned to redistributed routes.
	set metric-type — specifies the metric type assigned to redistributed routes.
	set tag — specifies the tag assigned to redistributed routes.

set local-preference

To set the BGP LOCAL_PREF attribute for routers within the local autonomous system, configure a filter.

Syntax set local-preference value

Parameters

Defaults

Command Modes

Command History

Usage Information

To delete a BGP LOCAL_PREF attribute, use the no set local-preferencecommand.

value	Enter a number as the LOCAL_PREF attribute value. The
	range is from 0 to 4294967295.
Not configured.
ROUTE-MAP

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

8.1.1.0Introduced on the E-Series ExaScale.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

pre-6.1.1.0 Introduced on the E-Series.

The set local-preferencecommand changes the LOCAL_PREF attribute for routes meeting the route map criteria. To change the LOCAL_PREF for all routes, use the bgp default local-preferencecommand.

Access Control Lists (ACL) 263