Dell 9.7(0.0) manual Enter the hexadecimal number as the stackable Vlan tag

Parameters

Defaults

Command Modes

Command History

Usage Information

Related Commands

number	Enter the hexadecimal number as the stackable VLAN tag.
	You may specify both bytes of the 2-byte S-Tag TPID. The
	range is from 0 to FFFF. The default is 9100.
0x9100
CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.7.0Introduced on the S4810.

8.2.1.0Introduced on the E-Series ExaScale. C-Series and S-Series accept both bytes of the 2-byte S-Tag TPID.

8.2.1.0Introduced on the E-Series ExaScale.

7.6.1.0Introduced on the C-Series and S-Series.

E-Series original

Command

For specific interoperability limitations regarding the S-Tag TPID, refer to the Dell Networking OS Configuration Guide.

The four characters you enter in the CLI for number are interpreted, as shown in the following table.

Number Resulting TPID

10x0001

100x0010

810x0081

81000x8100

portmode hybrid — sets a port (physical ports only) to accept both tagged and untagged frames. A port configured this way is identified as a hybrid port in report displays.

VLAN Stacking 1603