Dell 9.7(0.0) manual Show processes ipc flow-control cp, Rp1

Related Commands

0.12%	0.16%	0	igmp	10000	0.20%
0x00000132		420	42
0.10%	0.13%	0	vrrp	10000	0.20%
0x0000028d		410	41
0.05%	0.12%	0	ovsdbsvr	10000	0.20%
0x000000a9		200	20
0.03%	0.06%	0	arpm	10000	0.20%
0x00000253		100	10
0.02%	0.02%	0	otm	10000	0.20%
0x00000206		140	14
0.02%	0.03%	0	tnlmgr	10000	0.00%
0x00000012		1290	129
0.10%	0.12%	0	mount_mfs	10000	0.00%
0x0000024d		400	40
0.08%	0.14%	0	xstp

show hardware layer2 acl — displays Layer 2 ACL data for the selected stack member and stack member port-pipe.

show hardware layer3 — displays Layer 3 ACL or QoS data for the selected stack member and stack member port-pipe.

show hardware stack-unit — displays the data plane or management plane input and output statistics of the designated component of the designated stack member.

show hardware system-flow — displays Layer 3 ACL or QoS data for the selected stack member and stack member port-pipe.

show interfaces stack-unit — displays information on all interfaces on a specific S- Series stack member.

show processes memory (S-Series) — displays CPU usage information based on processes running in an S-Series.

show processes ipc flow-control

Display the single window protocol queue (SWPQ) statistics.

Syntax	show processes ipc flow-control [cp]
Syntax	show processes ipc flow-control [cp rp1 rp2 stack-unit]
Parameters	cp	(OPTIONAL) Enter the keyword cp to view the control
		processor’s SWPQ statistics.
Parameters	cp	(OPTIONAL) Enter the keyword cp to view the control
		processor’s SWPQ statistics.
	rp1	(OPTIONAL) Enter the keyword rp1 to view the Control
		Processor’s SWPQ statistics on Route Processor 1.*

Control and Monitoring 137