show vlt private-vlan
Display the private VLAN (PVLAN) associated with the VLT LAG for VLT peer nodes.
Syntax show vlt private-vlan
Command
Modes
EXEC
Command
History Version Description
9.7(0.0) Introduced on the S6000-ON.
9.5(0.0) Introduced on the Z9500.
9.4(0.0) Introduced on the S6000.
9.3(0.0) Introduced on the Z9000, S4810, and S4820T.
Usage
Information
If you add an ICL or VLTi link as a member of a primary VLAN, the ICL becomes a
part of the primary VLAN and its associated secondary VLANs, similar to the
behavior for normal trunk ports. VLAN symmetry is not validated if you associate an
ICL to a PVLAN. Similarly, if you dissociate an ICL from a PVLAN, although the
PVLAN symmetry exists, ICL is removed from that PVLAN in such a case. The ICL
Status field denotes the type of the VLAN port of the VLTi link configured in a
PVLAN.
Example Dell#show vlt private-vlan vlan-id
Codes: C- Community, I – Isolated, V – Internally tagged, T –
tagged, * - VLT Pvlan
Primary Secondary ICL Status
10 V (*)
20(C) V
30 (I) V
40 T
50(C) T
60 (I) T
show vlt role
Displays the VLT peer status, role of the local VLT switch, VLT system MAC address and system priority,
and the MAC address and priority of the local VLT device.
Syntax show vlt role
Default Not configured.
Command
Modes
EXEC
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
Virtual Link Trunking (VLT) 1641