Dell 9.7(0.0) manual Role-name

Parameters

Defaults

Command Modes

Command History

system	Enter the keyword system to send accounting information
	of any other AAA configuration.
exec	Enter the keyword exec to send accounting information
	when a user has logged in to EXEC mode.
commands	Enter the keyword command then a privilege level for
{level role	accounting of commands executed at that privilege level or
role-name	enter the keyword role then the role name for accounting
	of commands executed by a user with that user role.
name default	Enter one of the following:
	• For name, enter a user-defined name of a list of
	accounting methods.
	• For default, the default accounting methods used.
start-stop	Enter the keywords start-stopto send a “start accounting”
	notice at the beginning of the requested event and a “stop
	accounting” notice at the end of the event.
wait-start	Enter the keywords wait-startto ensure that the TACACS
	+ security server acknowledges the start notice before
	granting the user’s process request.
stop-only	Enter the keywords stop-onlyto instruct the TACACS+
	security server to send a “stop record accounting” notice at
	the end of the requested user process.
tacacs+	Enter the keyword tacacs+ to use TACACS+ data for
	accounting. The Dell Networking OS currently only supports
	TACACS+ accounting.
none
CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000–ON.
9.5(0.0)	Added support for roles on the Z9000, S6000, S4820T,
	S4810, and MXL
9.2(1.0)	Introduced on the Z9500.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

Security 1361