Dell 9.7(0.0) Series legacy command Usage, Field Description Port-Channel, Port-channel is, Part

Version	Description
9.7(0.0)	Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

8.1.1.0Introduced on the E-Series ExaScale.

7.6.1.0Introduced on the S-Series. Modified to display the LAG failover group status.

7.5.1.0Introduced on the C-Series.

E-Series legacy command

Usage	The following describes the show interfaces port-channelcommand shown
Information	in the following example.
	Field	Description
	Port-Channel 1...	Displays the LAG’s status. In the Example, the status of the
		LAG’s LAG fate-sharing group (“Failover-group”) is listed.
	Hardware is...	Displays the interface’s hardware information and its
		assigned MAC address.
	Port-channel is	Indicates whether the LAG is part of a LAG fate-sharing
	part...	group (“Failover-group”).
	Internet address...	States whether an IP address is assigned to the interface. If
		an IP address is assigned, that address is displayed.
	MTU 1554...	Displays link and IP MTU.
	LineSpeed	Displays the interface’s line speed. For a port channel
		interface, it is the line speed of the interfaces in the port
		channel.
	Members in this...	Displays the interfaces belonging to this port channel.
	ARP type:...	Displays the ARP type and the ARP timeout value for the
		interface.
	Last clearing...	Displays the time when the show interfaces counters
		were cleared.
	Queueing	States the packet queuing strategy. FIFO means first in first
	strategy.	out.
	packets input...	Displays the number of packets and bytes into the interface.
	Input 0 IP	Displays the number of packets with IP headers, VLAN
	packets...	tagged headers, and MPLS headers. The number of packets

736 Interfaces