VersionDescription

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.5.1.0Added support for 4-port 40G line cards on ExaScale.

8.3.7.0Introduced on the S4810.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

pre-6.2.1.1

Introduced on the E-Series.

tacacs-server group

Creates a group of TACACS servers.

Syntax

tacacs-server group group-name

Parameters

Defaults

Command Modes

Command History

Usage Information

Example

To delete a group of TACACS servers, use the no tacacs-server group group-namecommand.

group-nameEnter the name of the TACACS server group.

Not configured.

CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version

Description

9.7(0.0)

Introduced on the S6000–ON.

9.4.(0.0)

Introduced on the S-Series and Z-Series.

You can associate a TACACS server group with a VRF.

Dell(conf)#tacacs-server group group1 Dell(conf-tacacs-group)#tacacs-server host 1.1.1.1 key secret Dell(conf-tacacs-group)#tacacs-server host 2.2.2.2 key secret Dell(conf-tacacs-group)#tacacs-server vrf vrf1 source- interface tengigabitethernet 1/42 Dell(conf-tacacs-group)#show config

!

tacacs-server group group1

tacacs-server vrf vrf1 source-interface TenGigabitEthernet 1/42 tacacs-server host 1.1.1.1 key 7 9a2f3ec0c65c6f41 tacacs-server host 2.2.2.2 key 7 9a2f3ec0c65c6f41 Dell(conf-tacacs-group)#

Security

1403

Page 1403
Image 1403
Dell 9.7(0.0) manual Pre-6.2.1.1, Tacacs-server group group-name