Dell 9.7(0.0) manual Deny bandwidth, Parameters Bandwidth, Defaults Command, Characters maximum

Usage Information

Related Commands

VersionDescription

7.7.1.0Introduced on the C-Series.

The default-metriccommand in BGP sets the value of the BGP MULTI_EXIT_DISC (MED) attribute for redistributed routes only.

bgp always-compare-med — enables comparison of all BGP MED attributes.

redistribute — redistributes routes from other routing protocols into BGP.

deny bandwidth

Enables you to specify link band width extended-community attribute as the matching criteria to deny incoming or outgoing traffic.

Syntax	deny bandwidth
	To disable this setting, enter the no deny bandwidth command.
Parameters	bandwidth	Enter the keyword bandwidth to specify extended-
		community attribute as the matching criteria for denying
		traffic. The range is from 0 to 102400.
Defaults	N/A
Command	EXTENDED COMMUNITY LIST
Modes

Command History

Related Commands

VersionDescription

9.7(0.0) Introduced on the S-Series.

permit bandwidth – specify link band width extended-community attribute as the matching criteria to permitting incoming or outgoing traffic..

description

Enter a description of the BGP routing protocol

S6000

Syntax	description {description}
	To remove the description, use the no description {description}
	command.

Parameters	Enter a description to identify the BGP protocol (80
description
	characters maximum).

Border Gateway Protocol 377