Defaults

Command Modes

Command History

Usage Information

Not configured.

CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0)

Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

6.1.1.0Introduced on the E-Series.

Coordinated universal time (UTC) is the time standard based on the International Atomic Time standard, commonly known as Greenwich Mean time. When determining system time, include the differentiator between UTC and your local timezone. For example, San Jose, CA is the Pacific Timezone with a UTC offset of -8.

debug ntp

Display network time protocol (NTP) transactions and protocol messages for troubleshooting.

Syntaxdebug ntp {adjust all authentication events loopfilter packets select sync}

To disable debugging of NTP transactions, use the no debug ntp {adjust

all authentication events loopfilter packets select sync} command.

Parameters

Enter the keyword adjust to display information on NTP

adjust

 

clock adjustments.

all

Enter the keyword all to display information on all NTP

 

transactions.

authentication

Enter the keyword authentication to display information

 

on NTP authentication transactions.

1570

System Time and Date

Page 1570
Image 1570
Dell 9.7(0.0) manual Debug ntp, Adjust, Authentication