Dell 9.7(0.0) manual Equal Cost Multi-Path Ecmp, Ecmp-group ID

15

Equal Cost Multi-Path (ECMP)

Equal cost multi-path (ECMP) is supported on the Dell Networking OS.

ecmp-group

Provides a mechanism to monitor traffic distribution on an ECMP link bundle. A system log is generated when the standard deviation of traffic distribution on a member link exceeds a defined threshold.

S6000

Syntaxecmp-group {ecmp-group-idinterface interface link-bundle- monitor}

Parameters

Defaults

Command Modes

Command History

To remove the selected interface, use the ecmp-group no interface command.

To disable link bundle monitoring, use the ecmp-group no link-bundle- monitor command.

ecmp-group ID	Enter the identifier number for the ECMP group. The range is
	from 2 to 64.
interface	Enter the following keywords and slot/port to add the
	interface to the ECMP group:
	• For a 10-Gigabit Ethernet interface, enter the keyword
	TenGigabitEthernet then the slot/port information.
	• For a 40-Gigabit Ethernet interface, enter the keyword
	fortyGigE then the slot/port information.
	• For a LAG interface, enter the keywords port-channel
	then the slot/port information. The range is from 1 to 128.

Off

•CONFIGURATION

•CONFIGURATION ECMP-GROUP

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Equal Cost Multi-Path (ECMP) 583